Caps (0)
Headwear Embroidery
LOOKING FOR CAPS TO SUIT YOUR BRAND WE HAVE IT COVERED.
picking the right product.
WE HAVE A MULTITUDE OF PRODUCTS TO CHOOSE FROM.
PRICING WILL VARY FROM BRAND, STYLE, QUANTITIES AND APPLICATIONS.
Starting with:
Atlantis Distressed Cargo Caps.
Flexfit Retro Truckers.
Atlantis Rapper Trucker.
Flexfit Flat peak Snapbacks.
LOOKING FOR PRICES
ARTWORK FILES ARE CHARGED AT £25 PER LOGO
SET UP FEES ARE PER SIZE AND APPLICATION STYLE
(2D SET UP OR 3D SET UP)
SET UP FEES ARE A ONE OFF COST.
MINIMUM OF 24 UNITS PER DESIGN, THEN IN MULTIPLES OF 8 UNITS THERE AFTER.
WE CAN RUN SINGLE UNITS, YOU CAN SEE OUR SAMPLE COSTING ON OUR WEBSTORE.
THIS RATE WILL BE VALID UP TO A MINIMUM OF 24 UNITS PER DESIGN.
THREAD CHANGES PER DESIGN ARE POSSIBLE BUT YOU NEED MULTIPLES OF 8 UNITS PER COLOUR CHANGE.
EXAMPLE BELOW THREAD COLOURS ARE JUST AS IDEAS:
YOU PURCHASE 24 UNITS OF A DESIGN YOU COULD SPLIT THE ORDER INTO:
16 UNITS IN BLACK THREAD & 8 UNITS IN WHITE THREAD
OR
8 UNITS IN BLACK THREAD, 8 UNITS IN WHITE THREAD & 8 UNITS IN RED THREAD.
PRICING BREAKS RUN BASED PER DESIGN:
24 UNITS +
96 UNITS +
192 UNITS +
Yes we can even add woven labels to personalise your order.
NOT ALL LOGOS WORK FOR 3D EMBROIDERY
When it comes to applications for 3D Embroidery or applications to go on headwear there's certain limits you will have.
Cap structure: Some hats dont have enough structure to apply a 3D logo but on the other hand some caps are too ridged to take the embroidery needed.
Embroidery Style: Big logos, Badges and Backfill designs will hugely increase the cost per unit.
Cap height: not all hats can take the same size logo. The front portion of the cap will vary across brands and styles. Therefore Logos need to be in proportion when reduced.
Logo Type: Sometimes you will have to encorporate a mixture of 2D & 3D Embroidery. Logos that are too thin will only be processed as 2D Embroidery. Logos too thick will not hold the 3D Embroidery correctly.
take a look at some of our previous work.
Get a Little More Info
3D Embroidery uk: The Best Of The Best
One of the newest strings to our bow, Puff Embroidery otherwise known 3D Embroidery is fast becoming a popular choice for a lot of our clients.
If you’ve not already heard of Puff embroidery also known as 3D Embroidery. It’s a technique, which allows you to raise the surface of your designs, making them essentially three-dimensional. 3D Foam can give your designs a complete creative boost, transforming them completely. However some parts of the technique may be a little tricky so not all designs are possible. Size and design are critical when making sure you get the best effect for Puff Embroidery.
Puff embroidery is a technique where foam is inserted under the top stitch to raise the surface, giving a three-dimensional look to your embroidery designs. The 3D foam effect is commonly used on garments that don’t require much washing. Apparel like caps, jackets and other outerwear are pieces that are best suited for this technique.
THINGS TO BE AWARE OF WHEN ATTEMPTING TO USE 3D FOAM:
Typically the design plays a huge part, if the design is too intricate, small or design is too closely spaced the design will not work. If the design is too thick the thread will not have the best coverage over the foam base.
Foam colour is also important: it is best to use the same colour as your top thread as any excess foam would be less visible.
Subject matter is also important: 3D foam works best with satin stitching. If the object you want to raise can’t be digitized in satin, then you shouldn’t use foam. Carefully select the right garments for these types of embroidery, they work best and last much longer on items which are typically washed.
WHY IS THE 3D FOAM TECHNIQUE DIFFERENT?
The 3D foam technique is different to standard flat embroidery in the following ways:
-
Capping – Where the top stitch is not covering the foam, a separate object is created to cap the corners usually running in a perpendicular direction.
-
Securing stitches – These are needed to hold two objects together.
-
Stitch density – Spacing between penetrations needs to be denser to help cut and cover the excess foam
-
Top thread tension – This is usually loose when stitching a foam design.
Fonts and basic shapes are commonly used. More Pull Compensation is needed for the thickness of the foam.
IS 3D EMBROIDERY EXPENSIVE?
Depends on the size and detail of the design. Not all designs can be done in 3D Embroidery, its always best to check first.
IS THERE A MINIMUM ORDER FOR 3D EMBROIDERY?
We run single units, although our bulk units run from 24 units or in multiples of 8 but pricing does vary with quantities pieces for 3D Embroidery
CAN YOU CHANGE COLOURS?
Yes you can change colours but there is fee for the change and there must be changes in multiples of 8
DO YOU SAMPLE?
Yes we can although we would have to charge the digitising fee upfront (£25 per design). Check out our shop, we have sample packs on there for the Flexfit classic snapback and the retro trucker.
WHAT’S THE TURN AROUND TIME FOR 3D EMBROIDERY?
Standard turn around times can be up to 14 working days from approving your digital copy. But it really depends on seasons and order quantities.
HOW DO I GET A QUOTE
Send all artwork over to info@woveninc.com and the garments you’d like and we can price from there.
WHAT'S THE MAXIMUM SIZE FOR EMBROIDERY?
Take a look at our image below.
